Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
   - 10.1. Mechanical transmission
      10.1.1. Technical characteristics
      10.1.2. Oil replacement in a transmission
      10.1.3. Removal and installation of the lever of gear shifting
      10.1.4. Removal and installation of a cable of blocking of inclusion of a reverse gear
      10.1.5. Removal, installation and adjustment of draft of gear shifting
      10.1.6. Replacement of sealing rings
      10.1.7. Check, removal and installation of the switch of lamps of a backing
      10.1.8. Removal and installation of a drive of a speedometer
      + 10.1.9. Transmission
   + 10.2. Automatic transmission
   + 10.3. Power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



10.1.7. Check, removal and installation of the switch of lamps of a backing

GENERAL INFORMATION

Lamps of a backing join the switch of plunzherny type which is screwed in in the top part of a case of a transmission.

Check

PERFORMANCE ORDER
1. If backing lamps do not work, first of all check the fuse of an electric chain.
2. Disconnect from the switch the electric socket and, using an ohmmeter, check that contacts of the switch become isolated at inclusion of transfer of a backing.
3. Otherwise the switch is faulty and it is necessary to replace it.

Removal and installation

PERFORMANCE ORDER
1. For improvement of access to the switch remove the accumulator.
2. Disconnect from the switch the electric socket and unscrew the switch from a case of a transmission and remove it together with consolidation.
3. Installation is made in sequence, return to removal.
4. Thus it is necessary to establish new consolidation of the switch.