Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. Technical characteristics
   + 11.2. Pumping of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Forward brake shoes
   11.5. Replacement of back brake shoes on disk brakes
   11.6. Replacement of back brake shoes on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   - 11.10. Support of a forward brake
      11.10.1. Support removal
      + 11.10.2. Support repair
      11.10.3. Support installation
   + 11.11. Support of a back disk brake
   + 11.12. Back working brake cylinder
   + 11.13. Main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of the hand brake
   11.19. Removal and installation of the lever of the hand brake
   11.20. Replacement of brake shoes of the hand brake on back disk brakes
   + 11.21. Anti-blocking system of brakes (ABS)
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



11.10. Support of a forward brake

11.10.1. Support removal

PERFORMANCE ORDER
1. At existence remove caps of wheels, then weaken bolts of fastening of forward wheels.
2. Tighten the hand brake, then lift a forward part of the car and fix on supports.
3. Remove forward wheels.
4. For reduction of losses of brake liquid uncover a popolnitelny tank of brake system, close a tank mouth polyethylene and again screw a cover. It is necessary in order that the cover tightly closed a popolnitelny tank.
5. Alternatively, using a clip, press the brake hose going to a support.
6. Clear area round the connecting coupling of a brake hose and a support.
7. Unscrew the connecting bolt, a fixing brake hose to a back part of a support and disconnect from a support a hose.
8. Remove from a connecting bolt two sealing washers.
9. Close an opening in a support and a brake hose suitable jams.
10. Remove brake shoes.
11. On models with early updatings of a support of ATE unscrew two bolts and remove a support from the car.
12. On models with GMF supports, using a screw-driver edge as the lever, remove dustproof caps from two bolts of fastening of the holder of a support.
13. Unscrew bolts of a bolt of fastening of a support.
14. Remove a support from a rotary fist.