Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. Technical characteristics
   + 11.2. Pumping of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Forward brake shoes
   11.5. Replacement of back brake shoes on disk brakes
   11.6. Replacement of back brake shoes on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. Support of a forward brake
   - 11.11. Support of a back disk brake
      11.11.1. Support removal
      11.11.2. Support repair
      11.11.3. Support installation
   + 11.12. Back working brake cylinder
   + 11.13. Main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of the hand brake
   11.19. Removal and installation of the lever of the hand brake
   11.20. Replacement of brake shoes of the hand brake on back disk brakes
   + 11.21. Anti-blocking system of brakes (ABS)
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



11.11. Support of a back disk brake

11.11.1. Support removal

PERFORMANCE ORDER
1. At existence remove caps of wheels.
2. Then weaken bolts of fastening of back wheels.
3. Lift a back part of the car and fix on supports.
4. Remove back wheels.
5. Remove brake shoes.
6. For reduction of losses of brake liquid uncover a popolnitlny tank of brake system, close a tank mouth polyethylene and again screw a cover. It is necessary in order that the cover tightly closed a popolnitelny tank.
7. Clear area round the connecting coupling, a brake tube and a support.
8. Unscrew the connecting coupling, a fixing brake tube to a back part of a support and disconnect a brake tube. Be careful and do not deform a brake tube.
9. Close an opening in a support and a brake tube suitable jams.
10. Unscrew two bolts and remove a support from a fixing element of a nave.