Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. Technical characteristics
   + 11.2. Pumping of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Forward brake shoes
   11.5. Replacement of back brake shoes on disk brakes
   11.6. Replacement of back brake shoes on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. Support of a forward brake
   + 11.11. Support of a back disk brake
   + 11.12. Back working brake cylinder
   + 11.13. Main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of the hand brake
   11.19. Removal and installation of the lever of the hand brake
   11.20. Replacement of brake shoes of the hand brake on back disk brakes
   + 11.21. Anti-blocking system of brakes (ABS)
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



11.19. Removal and installation of the lever of the hand brake

Removal

PERFORMANCE ORDER
1. Unscrew a nut of fastening of the jack of cables of the hand brake and remove the jack.
2. Remove a rubber protective cover from draft.
3. Remove sitting of the driver for what unscrew bolts of fastening directing sitting to a floor.
4. Remove a cap and unscrew the unique screw, fixing the central console.
5. Remove switches of window regulators and a mirror with an electric drive, then move the central console back.
6. Cut a floor carpet.
7. Unscrew two bolts and remove the lever of the hand brake.
8. Unscrew from the lever the switch of a control lamp of the tightened hand brake.
9. If necessary replace a ratchet and gear sector, but thus for removal and installation them it is necessary to use plugs and rivets.

Installation

PERFORMANCE ORDER
1. Establish the lever of the hand brake on a place and fix it bolts, having tightened them the demanded moment.
2. Fix a floor carpet glue or a sticky tape.
3. Establish switches on the central console, then establish the console on a place and fix it the screw.
4. Establish forward sitting.
5. Establish a rubber protective cover and the jack.
6. Adjust the hand brake.