Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. Technical characteristics
   + 11.2. Pumping of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Forward brake shoes
   11.5. Replacement of back brake shoes on disk brakes
   11.6. Replacement of back brake shoes on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. Support of a forward brake
   + 11.11. Support of a back disk brake
   + 11.12. Back working brake cylinder
   + 11.13. Main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of the hand brake
   11.19. Removal and installation of the lever of the hand brake
   11.20. Replacement of brake shoes of the hand brake on back disk brakes
   + 11.21. Anti-blocking system of brakes (ABS)
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



11.3. Brake pipelines and hoses

GENERAL INFORMATION

Brake tubes are applied to transfer of brake liquid from the main brake cylinder to wheel brake cylinders. Connections of tubes with brake cylinders and switching centers are made by konusny couplings. The ends of tubes are pressed out and have a cone-shaped form for the corresponding size of konusny carving openings in brake cylinders or switching centers.

Before obzhatiy the ends of tubes the lock nut which after a vvinchivaniye of a cone-shaped surface in the konusny basis of a carving opening presses is put on them and pressurizes a tube.

Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of brake liquid at removal of working brake cylinders clips for a perezhatiya of brake hoses are used.


Prevention

At installation of a new brake tube or a brake hose be convinced that they are densely fixed in arms and are at sufficient distance from moving or heating-up details.

Upon termination of installation check level of brake liquid in the main brake cylinder and add it if necessary. Remove air from brake system and carefully check work of brakes before beginning car operation.