Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   + 12.2. Rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. Bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. Nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. Back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a being self-leveled back suspension bracket
   12.15. Removal and installation of a steering wheel
   + 12.16. Steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draft
   + 12.19. Steering transfer
   12.20. Air removal from steering system with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation of a popolnitelny tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. Body
+ 14. Electric circuits



12.15. Removal and installation of a steering wheel

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Using a screw-driver edge as the lever, remove from the central part of a steering wheel the button of a sound signal and disconnect from it the electric socket.
3. Establish forward wheels of the car for movement directly forward.
4. A screw-driver unbend uvulas (are specified by shooters) fixing washer which fixes a nut of a steering wheel from unscrewing.
5. Unscrew a nut of a steering wheel and remove fixing washer.
6. Put combination labels on a steering wheel and an end face of a steering shaft.
7. Using a stripper, remove a steering wheel from a steering shaft.
8. If necessary remove a contact ring of a sound signal. Keep in mind that the returnable segment of the index of turns on a ring should settle down at the left.

Installation

PERFORMANCE ORDER
1. Check that the washer and a spring are on the helmsman to a shaft.
2. Combine adjusting labels and in easy blows of a kiyanka establish a steering wheel on a steering shaft.
3. Check centering of a steering wheel.
4. Establish fixing washer and screw a nut of fastening of a steering wheel and tighten it the demanded moment.
5. For nut fixing from unscrewing bend uvulas of a fixing washer.
6. Connect the electric socket and establish the button of a sound signal.
7. Connect a weight wire to the accumulator.