Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   + 12.2. Rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. Bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. Nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. Back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a being self-leveled back suspension bracket
   12.15. Removal and installation of a steering wheel
   + 12.16. Steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draft
   - 12.19. Steering transfer
      12.19.1. Replacement of the elastic coupling of a shaft of steering transfer
      12.19.2. Replacement of protective casings of steering transfer
      12.19.3. Removal and installation of the shock-absorber of steering transfer
      12.19.4. Removal, repair and installation of steering transfer
   12.20. Air removal from steering system with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation of a popolnitelny tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. Body
+ 14. Electric circuits



12.19. Steering transfer

12.19.1. Replacement of the elastic coupling of a shaft of steering transfer

PERFORMANCE ORDER
1. Establish forward wheels in situation for movement directly forward.
2. In a motor compartment weaken bolts of fastening of steering transfer.
3. In salon of the car remove the bottom panel of furnish in deepening for feet of the driver.
4. Unscrew two tightening bolts, fixing the elastic coupling.
5. Move the elastic coupling up and remove it a shaft of steering transfer.
6. Before installation of the elastic coupling check installation of steering transfer and a steering wheel.
7. Establish the elastic coupling and screw in tightening bolts, but do not tighten them finally at this stage.
8. Press the elastic coupling and screw up the demanded moment bottom tightening a bolt.
9. Tighten the demanded moment bolts of fastening of steering transfer.
10. Move a steering shaft up against the stop and tighten top tightening a bolt of the elastic coupling.
11. Establish the bottom furnish of the dashboard in deepening for feet of the driver.