Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   + 12.2. Rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. Bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. Nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. Back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a being self-leveled back suspension bracket
   12.15. Removal and installation of a steering wheel
   + 12.16. Steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draft
   + 12.19. Steering transfer
   12.20. Air removal from steering system with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation of a popolnitelny tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. Body
+ 14. Electric circuits



12.21. Removal and installation of the pump of the amplifier of a steering

GENERAL INFORMATION

Arrangement of bolts of fastening and bolts which is necessary for weakening at adjustment of a tension of a driving belt of the pump of the amplifier of a steering

And – sharnirny bolts of the pump,

In – a sharnirny bolt of the mechanism of a tension,

With – an assembly bolt of the mechanism of a tension

PERFORMANCE ORDER
1. Remove a belt of a drive of the pump of the amplifier of a steering.
2. Disconnect from the pump pipelines and close the ends of pipelines suitable jams.
3. Unscrew bolts and remove the pump.
4. At a pump exit out of operation it is necessary to replace it, as repair of the pump is not provided.
5. Installation is made in sequence, return to removal.
6. At connection of pipelines use new sealing rings.
7. Establish and adjust a tension of a belt of a drive of the pump of the amplifier of a steering.
8. Add liquid in system of a steering and remove air from hydraulic system.