Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. Cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of a fairing of a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a trunk lid and торсионов
   13.12. Replacement of components of the lock of a trunk lid
   13.13. Windscreen
   13.14. Removal and installation of back being slightly opened glass
   13.15. Replacement of consolidation of back being slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of head restraints
   13.19. Removal of furnish of a luggage compartment
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. Electric equipment of a body
+ 14. Electric circuits



13.11. Removal and installation of a trunk lid and торсионов

Removal

PERFORMANCE ORDER
1. Open a trunk lid.
2. Using a marker, note an arrangement of hinges from two parties on a trunk lid.
3. On models with the central blocking disconnect the electric socket from the lock engine. The socket is located on the left side of a trunk lid.
4. Using the assistant, support a trunk lid and unscrew bolts of fastening of hinges.
5. Uncover a luggage carrier.
6. Torsiona fasten at the expense of own elasticity. For removal торсионов disconnect them at first from the central arm.
7. Then disconnect торсионы from a hinge arm (1 – торсион, 2 – a rubber emphasis).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. After installation of a trunk lid check that in a closed position the gap on its perimeter and elements of a body of the car everywhere is identical.
3. If necessary adjust the provision of a trunk lid for what weaken bolts of fastening of hinges and, moving a cover within the extended openings of installation, find demanded situation.