Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. Cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of a fairing of a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a trunk lid and торсионов
   13.12. Replacement of components of the lock of a trunk lid
   13.13. Windscreen
   13.14. Removal and installation of back being slightly opened glass
   13.15. Replacement of consolidation of back being slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of head restraints
   13.19. Removal of furnish of a luggage compartment
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. Electric equipment of a body
+ 14. Electric circuits



13.12. Replacement of components of the lock of a trunk lid

TRUNK LID LOCK

PERFORMANCE ORDER
1. Carry out the line on lock perimeter on a trunk lid.
2. Unscrew screws and remove the trunk lid lock.
3. Installation is made in sequence, return to removal.
4. The lock establish according to the line put before removal.
5. Check operation of the lock, opening and closing a luggage carrier several times.
6. If necessary adjust position of the lock or a latch.

LATCH OF THE LOCK OF THE TRUNK LID

PERFORMANCE ORDER
1. Remove protective furnish from a trunk lid ledge.
2. Unscrew a bolt (1), disconnect plugs (2) latches (3) and remove it.
3. Installation is made in sequence, return to removal.
4. For adjustment weaken a bolt and, moving a latch, establish it on the demanded height.

TRUNK LID HANDLE

PERFORMANCE ORDER
1. Open a trunk lid and unscrew two nuts, trunk lids fixing the handle which are available from the inside.
2. Installation is made in sequence, return to removal.