Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. Cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of a fairing of a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a trunk lid and торсионов
   13.12. Replacement of components of the lock of a trunk lid
   13.13. Windscreen
   13.14. Removal and installation of back being slightly opened glass
   13.15. Replacement of consolidation of back being slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of head restraints
   13.19. Removal of furnish of a luggage compartment
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. Electric equipment of a body
+ 14. Electric circuits



13.16. Replacement of an external rear-view mirror

MIRROR GLASS

On all models it is possible to replace glass of a mirror separately.

PERFORMANCE ORDER
1. Using a wooden wedge, remove old glass of a mirror and disconnect from it electric wires.
2. Connect to new glass of a mirror draft and latch mirror glass on a place (junctions are specified by shooters). Be careful not to break mirror glass.

THE MIRROR ELECTRIC MOTOR WITH HEATING

PERFORMANCE ORDER
1. For removal of the electric motor of a drive of a mirror remove mirror glass, then unscrew screws of fastening and disconnect the multicontact electric socket.
2. Installation is made in sequence, return to removal.

MIRROR WITH MANUAL ADJUSTMENT

PERFORMANCE ORDER
1. Remove the handle of adjustment of provision of a mirror and a decorative overlay of a mirror from the interior of a door.
2. Unscrew three screws (are specified by shooters) and remove a mirror.
3. Installation is made in sequence, return to removal.

MIRROR WITH ELECTRIC MANAGEMENT

PERFORMANCE ORDER
1. Removal of a mirror is made in the same way, as well as hand-operated mirrors, but thus instead of removal of the handle of management by a mirror it is necessary to disconnect the electric socket of a mirror. The electric socket is located in a door.
2. Installation is made in sequence, return to removal.