Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. Cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of a fairing of a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a trunk lid and торсионов
   13.12. Replacement of components of the lock of a trunk lid
   13.13. Windscreen
   13.14. Removal and installation of back being slightly opened glass
   13.15. Replacement of consolidation of back being slightly opened glass
   13.16. Replacement of an external rear-view mirror
   - 13.17. Seats
      13.17.1. Removal and installation of a forward seat
      13.17.2. Removal and installation of a back seat
   13.18. Removal and installation of head restraints
   13.19. Removal of furnish of a luggage compartment
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. Electric equipment of a body
+ 14. Electric circuits



13.17. Seats

13.17.1. Removal and installation of a forward seat

Removal

PERFORMANCE ORDER
1. Unscrew the screw and remove the furnish closing external directing forward seat.
2. Unscrew forward bolts of fastening directing a forward seat.
3. Unscrew back bolts of fastening directing a forward seat.
4. Remove a seat together with directing and, at existence, disconnect electric sockets from a seat heater.
5. If necessary remove directing from a seat.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal, but thus observe the following sequence of a tightening of bolts of fastening of sitting.
2. Acquire back bolts.
3. Screw in forward bolts and tighten them the demanded moment.
4. Tighten an external back bolt the demanded moment.
5. Tighten an internal back bolt the demanded moment.