Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. Cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of a fairing of a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a trunk lid and торсионов
   13.12. Replacement of components of the lock of a trunk lid
   13.13. Windscreen
   13.14. Removal and installation of back being slightly opened glass
   13.15. Replacement of consolidation of back being slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of head restraints
   13.19. Removal of furnish of a luggage compartment
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. Electric equipment of a body
+ 14. Electric circuits



13.20. Removal and installation of the central console

GENERAL INFORMATION

The central console consists of two parts. The back part is located about the lever of the hand brake, and the lobby is located under the control panel a heater.

PERFORMANCE ORDER
1. Removal of the central console is necessary for beginning with a back part. Using a screw-driver edge as the lever, remove a cap closing the screw.
2. Unscrew the screw (it is specified by an arrow) fastenings of a back part of the central console.
3. Shift a back part of the central console back.
4. Removal of a forward part of the central console can be made without further removal of a back part.
5. For removal of a back part of the central console disconnect from it switches and remove it on the lever of the hand brake.
6. Separate facing from the basis of the lever of gear shifting, thus it is possible not to remove a protective cover of the lever of gear shifting.
7. Unscrew screws (the screw is specified by an arrow) the fastenings of the central console located in a back part of the lever of gear shifting.
8. Unscrew screws (the screw is specified by an arrow) the fastenings of the central console located in a forward part of the lever of gear shifting.
9. On models with an automatic transmission remove a decorative overlay of the lever of the selector.
10. Release two brackets and remove an ashtray located under the control panel a heater.
11. Unscrew two screws (the screw is specified by an arrow), fixing the central console to the control panel a heater and remove it.
12. Installation is made in sequence, return to removal.