Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. Cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of a fairing of a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a trunk lid and торсионов
   13.12. Replacement of components of the lock of a trunk lid
   13.13. Windscreen
   13.14. Removal and installation of back being slightly opened glass
   13.15. Replacement of consolidation of back being slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of head restraints
   13.19. Removal of furnish of a luggage compartment
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. Electric equipment of a body
+ 14. Electric circuits



13.8. Removal and installation of a forward wing

Removal

PERFORMANCE ORDER
1. Remove forward furnish of the car.
2. Remove indexes of turns.
3. Remove protection of wings for what вытолкните the central part of plastic percussion caps and take percussion caps from a wing edge.
4. At existence remove a tank of a washer of headlights.
5. Unscrew 12 bolts, fixing a forward wing.
6. Cut a layer of hermetic and remove a wing.

Installation

PERFORMANCE ORDER
1. Clear from a surface of a body interfaced to a wing the remains of old hermetic and put a thick layer of fresh hermetic.
2. Establish on the car a wing and fix it bolts, having tightened them at this stage by hand.
3. Moving a wing, adjust its situation and tighten bolts.
4. Put on an internal surface of a wing a protective layer, and an external surface paint with the corresponding paint.
5. Establish a tank of a washer of headlights.
6. Establish protection of a wing and fix it new plastic percussion caps.
7. Establish the index of turns and forward furnish of the car.