Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
- 1. Maintenance instruction
   1.1. Protection of environment and economy of energy
   1.2. Key
   + 1.3. Steering wheel
   1.4. Seats
   1.5. Head restraints
   1.6. Seat belt
   1.7. Rear-view mirrors
   1.8. An adjustable external mirror with an electric drive
   1.9. Ignition lock
   + 1.10. Governing bodies and control devices
   1.11. Body elements
   1.12. Increase in a luggage compartment on cars the Hatchback
   1.13. Increase in a luggage compartment on cars the Versatile person
   1.14. Adjustment of height of a back suspension bracket
   1.15. Safety
   1.16. Operation of belts
   + 1.17. Lighting
   1.18. Opening of glasses and hatch
   1.19. Heating and ventilation
   1.20. Automatic transmission
   + 1.21. Catalyst
   1.22. Exhaust system, exhaust gases
   1.23. Instructions on driving
   1.24. Economy of fuel
   + 1.25. Wheels and tires
   1.26. Spare wheel, jack and tool
   + 1.27. Bases of safe operation of the car
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



1.19. Heating and ventilation

GENERAL INFORMATION

In the car the combined system of heating and ventilation is used. At the expense of mixing of cold and warm air adjustment of temperature is carried out without a delay and on all speeds is kept by a constant.

The size of a stream of air is regulated by the fan.

External air is sucked in before a windscreen, if necessary is warmed up and goes to car salon.
Removal of air is carried out or through lateral zaslonka, or through back doors, or through plastic inserts which are closed by a back door (Van).

For heating of feet of back passengers warmed-up air on channels under a carpet moves in a back part of salon.

Management of a heater

Left lever
Heating
Up
More warmly
Down
More cold

Constantly hold opened supply of air and only temporarily close it (a smoke, unpleasant smells etc.) for what move the lever of distribution of a stream of air to the middle and close all nozzles of ventilation.

Right lever
Air distribution
Up
For defrosting
Down
For the top space
Bottom lever
Air distribution
Up
For the top space
Down
For feet, forward and back space

FAN

The stream of air can be increased by means of the fan if it is necessary for increase in comfort or defrosting acceleration.

The arrow specified 3 steps of the fan.

AVERAGE NOZZLES OF VENTILATION

Turn snuffled ventilation it is possible to change the direction of a stream of air. Nozzles open a wheel with a nakatka.

At installation snuffled in the situation specified in drawing, the narrow stream of air on the back passenger moves, thus influencing comfort of the driver and the forward passenger.

LATERAL NOZZLES OF VENTILATION

According to position of the left lever from snuffled cold or warmed-up air moves. Nozzles open a wheel with a nakatka. In the fixed situation About nozzles are closed.

The stream of air can be increased by means of the fan.

Adjustment of a stream of air is carried out by turn and an inclination of plates snuffled.

The most comfortable situation – when the stream of warm air is sent to a cold season along doors.

LATERAL DISK NOZZLES

If the top lever of distribution of air is moved up, cold or warm air will move to a windscreen and lateral glasses (mainly in a zone of external mirrors).

SUMMER VENTILATION

For the maximum ventilation of the top part of salon completely open nozzles. The lever of distribution of air move to the middle.

For supply of air to feet the lever of distribution of air move down.

The lever of temperature move down.

HEATING

Through nozzles to a windscreen.

To feet.

Through lateral nozzles of ventilation.

Combined supply of air is possible.

The stream of air can be increased by means of the fan.

Efficiency of heating depends on temperature of cooling liquid therefore heating is used only at the heated-up engine to normal working temperature.

Heating of feet

PERFORMANCE ORDER
1. For supply of air to feet the lever of distribution of air move down. The lever of temperature move up.
2. Increase an air stream by means of the fan, having established it on the second step. Close the central nozzles of system of ventilation.

Removal of moisture and defrosting of glasses

PERFORMANCE ORDER
1. All levers of the control panel a heater move up and turn on the heater fan.
2. Lateral nozzles can be open and directed on lateral glasses.
3. Close the central nozzles.
4. Include a heater of back glass.

WARMED BACK GLASS

The heater of back glass works only at the working engine.

To switch off immediately as soon as the review will be free. Avoid unnecessary overloads of electric system.

When cleaning an internal surface of back glass do not damage heater conductors.

SITTING LOBBIES WITH ELECTROHEATING

Push-button switch on the right.

The top switch – sitting of the driver.

The bottom switch – sitting of the forward passenger.