Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
- 4. Engine
   - 4.1. The OHV engine (with a camshaft in the block of cylinders)
      4.1.1. Technical characteristics
      4.1.2. Compression check
      4.1.3. The repair operations which are not demanding removal of the engine
      + 4.1.4. The repair operations demanding removal of the engine
      4.1.5. Adjustment of gaps of valves
      + 4.1.6. Head of the block of cylinders
      4.1.7. Removal and installation of the oil pallet
      + 4.1.8. Oil pump
      + 4.1.9. Asterisks of the mechanism of a gazoraspredeleniye
      + 4.1.10. Pistons and rods
      4.1.11. Removal and flywheel installation
      4.1.12. Removal and installation of support of the power unit
      4.1.13. Removal and installation of a camshaft and pushers
      4.1.14. Removal and installation of a back sealing ring of a cranked shaft
      4.1.15. Removal and installation of a cranked shaft and radical bearings
      + 4.1.16. Check of elements of the engine
      4.1.17. System of greasing of the engine
      4.1.18. Removal and engine installation
      4.1.19. Engine start after major maintenance
   + 4.2. OHC engines
   + 4.3. The DOHC engine with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



4.1.11. Removal and flywheel installation

PERFORMANCE ORDER
1. Remove coupling and vyzhimny the bearing.
2. Unscrew three bolts and remove directing plug of the vyzhimny bearing.
3. Note the provision of a flywheel of rather cranked shaft.
4. Block a flywheel from a provorachivaniye, having inserted a screw-driver edge through teeths of a gear wreath of a flywheel into a transmission case. Unscrew bolts of fastening of a flywheel and remove a flywheel.
5. Installation is made in sequence, return to removal. Tighten bolts of fastening of a flywheel the demanded moment.