Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
- 4. Engine
   - 4.1. The OHV engine (with a camshaft in the block of cylinders)
      4.1.1. Technical characteristics
      4.1.2. Compression check
      4.1.3. The repair operations which are not demanding removal of the engine
      + 4.1.4. The repair operations demanding removal of the engine
      4.1.5. Adjustment of gaps of valves
      + 4.1.6. Head of the block of cylinders
      4.1.7. Removal and installation of the oil pallet
      + 4.1.8. Oil pump
      - 4.1.9. Asterisks of the mechanism of a gazoraspredeleniye
         4.1.9.1. Removal of asterisks
         4.1.9.2. Installation of asterisks
      + 4.1.10. Pistons and rods
      4.1.11. Removal and flywheel installation
      4.1.12. Removal and installation of support of the power unit
      4.1.13. Removal and installation of a camshaft and pushers
      4.1.14. Removal and installation of a back sealing ring of a cranked shaft
      4.1.15. Removal and installation of a cranked shaft and radical bearings
      + 4.1.16. Check of elements of the engine
      4.1.17. System of greasing of the engine
      4.1.18. Removal and engine installation
      4.1.19. Engine start after major maintenance
   + 4.2. OHC engines
   + 4.3. The DOHC engine with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



4.1.9. Asterisks of the mechanism of a gazoraspredeleniye

4.1.9.1. Removal of asterisks

PERFORMANCE ORDER
1. Remove a cap and weaken bolts of fastening of a forward right wheel. Lift a forward part of the car and fix on supports. Remove the right forward wheel.
2. Unscrew four bolts and remove a plate opening access to coupling and located in the basis of a case of coupling.
3. Weaken nuts and bolts of fastening of the generator, move the generator to the engine and remove an auxiliary driving belt from pulleys.
4. Fix a flywheel from a provorachivaniye, having inserted a screw-driver edge between teeths of a flywheel and a cover. Unscrew a bolt of fastening of a pulley of a cranked shaft and remove a pulley.
5. Unscrew the bolts, fixing a cover of asterisks to a forward part of the engine and uncover.
6. Note orientation and remove an oil reflector from a cranked shaft.
7. Temporarily establish a pulley of a cranked shaft and for a bolt of fastening of a pulley turn a cranked shaft of the engine in such situation that the shponka (And) on an asterisk of a cranked shaft was directed up, and labels on asterisks (In) were directed to each other. Remove a pulley of a cranked shaft.
8. Unscrew two bolts and remove the mechanism of a tension of a driving chain. Two types of mechanisms of a tension are used: simply with a spring or with supply of oil under pressure. The mechanism with supply of oil under pressure limits pressure of oil to exclude premature emission of elements of the mechanism of a tension.
9. Unscrew a bolt of fastening of an asterisk of a camshaft and remove it together with a washer. For asterisk keeping from a provorachivaniye when unscrewing a bolt insert through an asterisk opening a screw-driver and arrange it on a plate of fastening of a camshaft.
10. Using a screw-driver edge, remove asterisks of distributive and cranked shaft together with a driving chain.
11. Wash out details in kerosene and dry up them. Clear the laying remains from interfaced surfaces of a cover and the block of cylinders of the engine.