Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
- 5. System of cooling, heating and ventilation
   5.1. Technical characteristics
   5.2. Removal and installation of hoses of system of cooling
   5.3. Removal, check and radiator installation
   5.4. Removal, check and thermostat installation
   5.5. Removal and installation of the water pump
   5.6. Check, removal and installation of the electric fan of a radiator
   + 5.7. Check, removal and installation of electric sensors of system of cooling
   5.8. Heating and ventilation system
   + 5.9. Elements of system of heating
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



5.6. Check, removal and installation of the electric fan of a radiator

Check

PERFORMANCE ORDER
1. Tension to the electric fan of a radiator moves via the lock of ignition, the relay and the fuse. The electric chain of the fan of a radiator copes a temperature-sensitive element which is established sideways a radiator.
2. Check operability of a temperature-sensitive element of the fan of a radiator. The fan should turn on at excess of working temperature of the engine, that is some minutes prior to an entrance of an arrow of the index of temperature of the engine in red sector. If the fan does not turn on, remove wires from a temperature-sensitive element, connect them among themselves and include ignition. If the fan after that earns, possibly, the temperature-sensitive element which is subject to replacement failed.
3. In case the fan still does not work, check, whether tension to a temperature-sensitive element moves. If tension on a temperature-sensitive element is absent, probably, wires are damaged or fused the fuse. If tension moves to a temperature-sensitive element, check reliability of connection it with mass of the car.
4. If the temperature-sensitive element and electroconducting in a good condition, that, possibly, is damaged the engine of the fan of a radiator. For check of the electric motor disconnect from it the electric socket and, using additional wires, submit tension directly on the engine. If thus the electric motor does not work, means, it is faulty and it is necessary to replace it.

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect the electric socket from the electric motor of the fan of a radiator. Release clips of a plait of wires of the electric motor of the fan of a radiator and move a plait of wires aside.
3. Unscrew fastening bolts from two parties in the top part of a casing of the fan of a radiator, then reject a fan casing to the engine, move it up and remove from a radiator.
4. Unscrew three nuts and remove the engine of the fan of a radiator from a casing. If necessary remove a spring bracket and remove a krylchatka from a shaft of the engine of the fan of a radiator.
5. If the engine of the fan of a radiator is faulty, it is necessary to replace it as repair of the engine is not provided.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Thus check, that the lower part of a casing of the fan of a radiator was correctly established on a radiator.
2. In summary start the engine, warm up it to normal working temperature and check that the fan of a radiator works.