Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
- 5. System of cooling, heating and ventilation
   5.1. Technical characteristics
   5.2. Removal and installation of hoses of system of cooling
   5.3. Removal, check and radiator installation
   5.4. Removal, check and thermostat installation
   5.5. Removal and installation of the water pump
   5.6. Check, removal and installation of the electric fan of a radiator
   - 5.7. Check, removal and installation of electric sensors of system of cooling
      5.7.1. Temperature-sensitive element of the fan of a radiator
      5.7.2. The sensor of the index of temperature of cooling liquid
      5.7.3. Temperature-sensitive element of system of injection of fuel
   5.8. Heating and ventilation system
   + 5.9. Elements of system of heating
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



5.7. Check, removal and installation of electric sensors of system of cooling

5.7.1. Temperature-sensitive element of the fan of a radiator

GENERAL INFORMATION

Temperature-sensitive element arrangement

The temperature-sensitive element of the fan of a radiator is established from lateral face of a radiator.

Check

Look the corresponding description in subsection 5.6.

Removal

PERFORMANCE ORDER

Prevention

Removal of a temperature-sensitive element of turning on of the fan of a radiator make on the cold engine.


1. Or merge cooling liquid from cooling system below level of installation of a temperature-sensitive element, or have a suitable stopper it is necessary for them to close an opening after a temperature-sensitive element vyvinchivaniye.
2. Disconnect the electric socket from a temperature-sensitive element of turning on of the fan of a radiator.
3. Unscrew a temperature-sensitive element of the fan of a radiator from a radiator and remove a sealing ring.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. At installation of a temperature-sensitive element use a new sealing ring. Fill in cooling liquid in cooling system.
2. In summary start the engine, warm up it to normal working temperature and check operability of the fan of a radiator.