Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburetor
      6.1.1. Technical characteristics
      6.1.2. Use of unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and fuel level sensor installation
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management by an air zaslonka
      + 6.1.11. Carburetors
      6.1.12. Check of the electromagnetic valve of interruption of supply of fuel
      6.1.13. Removal and carburetor installation
      + 6.1.14. Carburetor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and installation of an exhaust system
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



6. Fuel and exhaust systems

6.1. Models with the carburetor

GENERAL INFORMATION

The power supply system fuel consists of a fuel tank, the fuel pump and the carburetor. The fuel tank is established in the back lower part of the car.

The mechanical fuel pump of diafragmenny type is put in action by the clown of a camshaft.

The air filter established on the carburetor, contains a replaceable filtering element. In front of the air filter the temperature regulator with a zaslonka is established. The temperature regulator maintains temperature some air arriving in the engine at an optimum level because the zaslonka operated by a temperature regulator, provides or receipt in the engine of cold air, or the air which has been warmed up by a final collector.

The fuel pump takes away fuel from a fuel tank and via the filter submits it to the carburetor. Excess of fuel on the returnable pipeline comes back to a fuel tank.


Prevention

Gasoline extremely fire - also is explosive, therefore it is necessary to show care at work on any part of fuel system.

Works on fuel system are necessary for making in well aired room for what it is possible to open all windows and doors for draft creation.

At work on fuel system do not use open fire, electric welding and tools, at work with which sparks can be formed. Check that in close proximity to a workplace there is a charged fire extinguisher.

For protection of eyes against fuel hit in them use points. At fuel hit on skin wash out this place a large amount of water.

The capacity in which there was a fuel, contains pairs of fuel and is potentially explosive.

At work with fuel system observe purity as the dirt which has got to channels of fuel system, can block them that will break normal operation of the engine.