Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburetor
      6.1.1. Technical characteristics
      6.1.2. Use of unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and fuel level sensor installation
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management by an air zaslonka
      + 6.1.11. Carburetors
      6.1.12. Check of the electromagnetic valve of interruption of supply of fuel
      6.1.13. Removal and carburetor installation
      + 6.1.14. Carburetor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and installation of an exhaust system
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and charging system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



6.1.15. Removal and installation of an inlet collector

Removal

PERFORMANCE ORDER
Models of 1,2 l
1. The collector can be removed both with the carburetor, and without the carburetor. Disconnect from a collector a vacuum hose of the vacuum amplifier of brakes.
2. Unscrew three bolts (collector fastenings to a head of the block of cylinders are specified by shooters) and remove a collector and laying.
L models 1,3, 1,4 and 1,6
3. Merge cooling liquid from cooling system.
4. Remove the generator.
5. Disconnect a pipe of system of cooling from an inlet collector and a coupling case.
6. On models of 1,3 l disconnect the electric socket of the index of temperature of cooling liquid.
7. Remove the carburetor.
8. Disconnect a vacuum hose of the vacuum amplifier of brakes.
9. Unscrew nuts and remove an inlet collector and laying of an inlet collector.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Thus it is necessary to use new laying. Tighten nuts and bolts of fastening of a collector the demanded moment. On models 1,3, 1,4 and 1,6 of l fill in cooling liquid in cooling system. Adjust a tension of an auxiliary driving belt of the generator.