Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
- 8. Ignition system
   - 8.1. Ignition system with the breaker
      8.1.1. Technical characteristics
      8.1.2. Check of system of ignition
      8.1.3. Adjustment of a gap and the closed condition of contacts of the breaker
      8.1.4. Removal and installation of contacts of the breaker
      8.1.5. Check, removal and condenser installation
      + 8.1.6. Ignition distributor
      + 8.1.7. Adjustment of a corner of an advancing of ignition
      8.1.8. Removal, check and installation of the coil of ignition
   + 8.2. Electronic contactless system of ignition
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits

8.1.1. Technical characteristics


The ignition distributor with the contact breaker
Operating procedure of cylinders
1–3–4–2 (Number 1 from a pulley of a cranked shaft)

Ignition distributor

Direction of rotation of a rotor
Counter-clockwise (if to take a detached view covers)
Gap between breaker contacts
0,4 mm
Corner of the closed condition of contacts of the breaker
47-53 °
Corner of an advancing of an eazhiganiye (see also subsection
10 ° to VMT (the label of a pulley of a cranked shaft and a cover edge should be thus combined)

Ignition coil

Resistance of primary winding (approximately)
1,2-1,6 Ohm
Resistance of a secondary winding (approximately)
7 kiloohms

Tightening moments

Spark plugs
40 Nanometers