Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. Maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance
+ 4. Engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and charging system
- 8. Ignition system
   - 8.1. Ignition system with the breaker
      8.1.1. Technical characteristics
      8.1.2. Check of system of ignition
      8.1.3. Adjustment of a gap and the closed condition of contacts of the breaker
      8.1.4. Removal and installation of contacts of the breaker
      8.1.5. Check, removal and condenser installation
      + 8.1.6. Ignition distributor
      + 8.1.7. Adjustment of a corner of an advancing of ignition
      8.1.8. Removal, check and installation of the coil of ignition
   + 8.2. Electronic contactless system of ignition
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Electric circuits



8.1.8. Removal, check and installation of the coil of ignition

Removal and installation

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Mark and disconnect low-voltage wires from the ignition coil.
3. Disconnect a high-voltage wire from the ignition coil.
4. Unscrew bolts and remove the ignition coil.
5. Installation is made in sequence, return to removal.

Check

PERFORMANCE ORDER
1. For check of the coil of ignition it is necessary to use an ohmmeter.
2. Check integrity of primary winding of the coil of ignition, connecting an ohmmeter to positive and negative plugs of the coil of ignition.
3. Integrity of a secondary winding of the coil of ignition can be checked, connecting an ohmmeter to the positive plug of primary winding and to the high-voltage plug.
4. Check that there is no connection between the high-voltage plug and the case of the coil of ignition.